- Products
- Sensors
- Base Unit
- Add-Ons
- Hubs
- How It Works
- Live Demo
- Placement
- API & Integration
- Sensor Configurator (BOM)
-
More
SensorGateway (Base Unit)
Close
The SensorGateway is the base unit of any sensor deployment.
It's the host to which sensors connect to.
It makes sensor data available ot other applications (SNMP, Modbus TCP, JSON)
SensorGateway
- More
-
More
Rack Level Temperature & Humidity Monitoring
Close
The ambient temperature measurement checks if your cooling is still operating and if the room has the desired temperature setting. Combined with the humidity sensors, it ensures that your equipment is running within manufacturers' limits.
Temperature fluctuations impact equipment's lifespan. Humidity affect electronics and may result in corrosion.
Temperature & Humidity Sensors
- More
-
More
Water Ingress
Close
Water is the enemy of electricity. Water leak came come from multiple sources: leaking roof, street flooding, snow melt and many more. The leak sensor is a water leak sensitive cable that is put around the perimeter of the BESS.
Water Leak Sensing
-
More
Daisy Booster
By default the maximum length on a daisy chain is 100m/330ft.
Close
The DAISY-BOOSTER extends that length. Based on a LED coloring code (green, amber or red) you know where to put it in the daisy chain connection.
In this live demo, the booster is inserted after the fifth daisy chain sensor (on its right). A 300m/980ft RJ45 CAT6 cable runs from sensor 5 to the booster. Behind the booster 2 additional sensors are connected and reporting.
Daisy Booster
-
More
Air quality sensor
Close
An air quality sensor, monitoring CO2, VOCs, temperature, and humidity, is essential in IT or power infrastructure management. Fluctuations in these parameters can indicate poor ventilation or chemical leaks, affecting equipment performance and employee health. Timely detection ensures a safe, efficient environment, preventing system failures and promoting a healthy workplace. It's crucial for proactive maintenance and safety.
Air quality sensor
-
More
Lux Luminosity Sensor
Close
A lux sensor, reporting luminosity levels, is vital for detecting light-based anomalies in IT or power infrastructure. Sudden changes in light intensity can signal electrical faults or equipment malfunctions. Early detection through lux monitoring helps avert potential damage, ensuring system stability and reliability. It's a key tool for proactive infrastructure maintenance.
Luminosity Sensor
-
More
Power Quality Monitoring
Close
The quality of power is one of the main reasons causing batteries to fail. This sensor is able to detect up to 85% of all power quality issues. Plug & Play. No electrical work needed.
Power Quality Sensors
-
More
Daisy Starter
The DAISY-STARTER connects to the SensorGateway (BASE-5). 1 Daisy starter per base unit is supported. It acts as the hub between the daisy chained sensors and the SensorGateway.
Close
Daisy Starter
-
More
Sound Anomaly Detection
Close
A sound decibel sensor is crucial for monitoring IT or power infrastructure. It detects noise level changes indicating malfunctions, enabling early intervention. This prevents downtime and equipment damage, ensuring optimal operation and prolonging system longevity. Essentially, it's a proactive tool for maintaining infrastructure health and reliability.
Security Sound Sensor -
More
Monitoring Appliance
Close
The Monitoring Touch Appliance is a Microsoft Surface GO2 based open computer that enables you to log, monitor and alert on data from your equipment and sensors right at the edge.
With the optional Cellular it can alert you anytime, anywhere and everywhere: email, SMS or Slack. Get alerts even when your network is down.
Monitoring Appliance
-
More
Thermal Image (Medium) Sensor
Close
Thermal runaways of equipment will go undetected with traditional temperature sensors. Indeed cooling units will try to compensate the heat problem resulting in anomalies to go undetected.
The thermal Image sensor looks at the equipment. It monitors the surface temperature for anomalies.
In 4800 points.
Every 2 seconds.
Infrared Thermal Image Sensors
- More
-
More
PM Particle Sensor
Close
The presence of dust accumulates in equipment then at first power usage will increase due to the harder working fans and CPU's running at higher temperatures. Ultimately electronics may fail due to short circuits or corrosion.
The particle sensor monitors for airborne particles in the air of multiple sizes: PM1, PM2.5, PM4 and PM10.
Particle Sensor
-
More
SF6 Gas Sensor
Close
An SF6 gas sensor is critical for monitoring leaks from Gas Insulated Switchgear (GIS). SF6, an insulating gas used in high-voltage equipment, poses significant risks when leaked. Such leaks can reduce insulation effectiveness, increasing the likelihood of arc flashes—a dangerous electrical discharge that can cause fires, equipment damage, and severe injury. Timely detection of SF6 leaks is essential for preventing these hazardous incidents, ensuring operational safety and reliability in electrical infrastructure.
SF6 Gas sensing
-
More
Atmospheric Corrosion Sensor
This sensor monitors the atmospheric corrosion for copper and silver in real time and makes it available over Modbus TCP or SNMP.
Close
ACM Corrosion Sensor
-
More
R134A Gas Sensor
Close
An R134 gas sensor is vital for detecting refrigerant leaks in cooling systems crucial to IT and electrical infrastructures. Leaks of R134, a common refrigerant, indicate a failing cooling system, which can lead to overheating of critical components. Overheating in such environments can cause hardware malfunctions, data loss, and increased risk of electrical fires. Early detection of R134 leaks is essential to prevent these catastrophic outcomes, ensuring the continuity and reliability of operations. The sensor aids in maintaining the optimal performance of cooling systems, which is key to the health and efficiency of IT and electrical setups.
R134a Gas sensing
-
More
H2S Gas Sensor
Close
An H2S gas sensor is crucial for detecting hydrogen sulfide in environments with IT and electrical equipment. H2S, a highly corrosive gas, poses serious threats to such equipment. Its presence can lead to accelerated corrosion of metal components, including circuit boards and wiring, compromising the integrity and functionality of these systems. The corrosive effect of H2S can result in short circuits, equipment failures, and significant data loss.
H2S Gas sensing
-
More
CO2 Gas Sensor
Close
A CO2 sensor is critical in monitoring IT and electrical equipment environments. Elevated CO2 levels can be an early indicator of inadequate ventilation, leading to overheating and reduced efficiency of equipment. High CO2 concentrations may also signal the presence of human or combustion-related activities, which could pose a fire risk. Timely detection and response to increased CO2 levels help maintain optimal operational conditions, prevent equipment failure, and ensure safety in these critical environments. Thus, CO2 monitoring is essential for proactive infrastructure management and risk mitigation.
CO2 Gas sensing
-
More
Wireless Hub & Nodes
Turn any wired sensor into a wireless sensor with a distance of up to 500m between sensor and base unit.
Close
Wireless Hub & Nodes
-
More
Cellular Addon On
Our LTE device that can generate alerts via SMS or push data to a cloud of your choice over JSON. This module can be shared but multiple base units on the same network segment.
Close
Lte Addon Module
The SensorHub expands the number of ports from 2 to 8. With the relay inputs and outputs, the SensorGateway becomes a smart device that based on sensor conditions can automate specific control functions.
Online Sensor Demo
Sales Terms | Warranty Policy | Privacy Statement | Terms of Use | Cookie Policy